Shenzhen Xiyuanyuan Technology Co., Ltd.
Main products:Power Adapter, Power Supply, Charger
Products
Contact Us
  • Contact Person : Mr. Lin Huizhou
  • Company Name : Shenzhen Xiyuanyuan Technology Co., Ltd.
  • Tel : 86-0755-29999683
  • Fax : 86-0755-29999681
  • Address : Guangdong,shenzhen,No. 21 Xinghua Road, Fuyong Town,Bao'an District
  • Country/Region : China
  • Zip : 518128

24Vmax 2.5Amax 15Wmax dual color led light universal adapter

24Vmax 2.5Amax 15Wmax dual color led light universal adapter
Product Detailed
universal adapter: 1.24 months warranty 2.over current,short-circuit protection 3.100% full-load burning test

24Vmax 2.5Amax 15Wmax dual color led light universal adapter

colorblack
led indicatoryes
input voltage100-240v
output voltage24Vmax
output current2.5Amax
housing size75*28*45
socket typefor E.U.

Quality control:

1.full inspection:

    1.Plug-in board inspection: to make sure no components in wrong place, no reverse components, no components left, etc.

    2.Semi-finished products full inspection: to make sure no cold solder, lack of components, no tindross, no short-circuit, no open circuit, no bad led indicator, no high voltage, no low voltage, no output, etc.

    3.Assembly full inspection: to make sure every unit with power, with right cables, with good appearance, with low ripple, without low voltage, without bad led indicator, etc.

    4.Full inspection after burn-in: to make sure every unit with high temperature resistance, with power,no bomb unit, no high voltage, no low voltage, no bad led indicator, etc.

    5.Finished products full inspection: to make sure every unit with power, with right cables, with low ripple, no high voltage, no low voltage, no bad led indicator, no bad ultrasonic bonding, etc.

    6.Visual full inspection: to make sure no scratched case, no cracked wires, no missing screw,no label misaligned, etc.

2.Sampling inspection:

    IQC (incoming quality control): according to AQL-MIL-STD-105E level II standard

    OQC (outgoing quality control): according to AQL-MIL-STD-105E level II standard.

    100% full load burn-in test for 1 hour, doing shock test per 10 minutes for 20 second



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.